Table of Contents
Advertisement
1
Fig. 36
Warning
The safety gloves included in the
disposing of the blade!
Lateral movement
If the sectioning results are not satisfactory, the blade holder (on a base here (→ "Fig. 37")) can be
shifted sideways in order to use another part of the blade, and to benefit from the entire length of the
blade.
To do so, follow these steps:
1. Turn the clamping lever
shift the blade holder sideways to the desired position.
2. To tighten, turn the clamping lever
Fig. 37
Leica CM1520
(→ P. 24 – 4.3 Standard delivery - packing list)
(→ "Fig. 37-14")
to the rear (counterclockwise) to release, and then
(→ "Fig. 37-14")
Daily Use of the Instrument
must be worn when
to the front (clockwise).
14
7
45
Advertisement
Table of Contents
