Table of Contents
Advertisement
After the display is locked using the
can NO LONGER be changed.
» To unlock the display, press and hold the
When the display is locked, the LEDs between the hour and the minute display on the time panel are
turned off (→ "Fig. 21").
6.4
Control panel 2 – Electric coarse feed
1
2
Fig. 22
Leica CM1520
Key
button
Moving the specimen away from the knife
• Fast return to the rear end position starts.
Fast
• The return movement can be stopped by pressing one of the
coarse feed buttons.
• Slow return to the rear end position starts.
Slow
Advancing the specimen toward the knife
• Fast or slow feed toward the knife starts.
Slow
Fast
Operating the Instrument
(→ "Fig. 21-1")
(press and hold for 5 sec.), set values
Key
button
(→ "Fig. 21-1")
The LED (→ "Fig. 22-1") flashes while the specimen head
is in motion.
The LED lights up when the rear end position has been
reached (→ "Fig. 22-1").
The motion continues as long as the button is held.
The LED (→ "Fig. 22-2") starts flashing as long as the
specimen head is in motion.
The LED lights up when the forward end position has
been reached (→ "Fig. 22-2").
To feed the specimen, press and hold the appropriate
Slow
or
Rapid
button.
again for 5 seconds.
6
35
Advertisement
Table of Contents
