Table of Contents
Advertisement
7
Daily Use of the Instrument
Then insert the blade as described (→ P. 42 – Inserting a high-profile blade).
Fig. 33
Removing the blades
1. Fold the anti-roll guide system
(→ "Fig. 34-11")
guide remains unchanged.
2. Open the clamping lever
3. Carefully lift out the blade (→ "Fig. 34-9"). Continue with instruction step 5.
11
Fig. 34
4. Another option for removing the blade is to use the brush with magnet (→ "Fig. 35-12"). To
do so, fold the clamping lever
Fold the anti-roll guide system
(→ "Fig. 35-1")
4
Fig. 35
5. Once the blade has been removed from the blade holder, it is disposed of in the dispenser
container (storage compartment in bottom (→ "Fig. 36-1").
44
(→ "Fig. 34-4")
(not the adjusting screw of the anti-roll guide), so that the height of the anti-roll
(→ "Fig. 34-10")
4
9
(→ "Fig. 35-10")
(→ "Fig. 35-4")
to the blade and lift it upwards and out.
12
1
10
to the left – while doing so, hold the lever
by turning it counterclockwise (→ "Fig. 34").
10
downward counterclockwise (→ "Fig. 35").
to the left. Guide the brush with magnet
Version 2.0, Revision K
Advertisement
Table of Contents
