Removing And Cleaining The Door With A Metal Polisher - Leica EM ACE600 Operating Manual


The LCD control panel should be cleaned with standard commercial screen
cleaner when the system is switched off

Accidental spillage of solvents (e.g. acetone, isopropanol or ethanol) must
be removed immediately with a damp, lint-free cloth moistened with
aqueous cleaning agents

5.2.1 Removing and cleaining the door with a metal polisher

To remove the door lift it up and take it out.
Place the door flat on a soft surface to clean. Do not use abrasive cleaning
material. Scratches could cause a vacuum leak.
The complete glass can be exchanged by unscrewing both screws on the side to
hold the glass. Replace the glass and tighten the screws again.
Operating Manual Leica EM ACE600 Version 01/19 Page 115