Table of Contents
Advertisement
11
Fig. 30
4. Rotate clamping lever
5. Fold the anti-roll guide system
lever (→ "Fig. 31-11").
4
Fig. 31
Note
The anti-roll guide system functions as a safety guard here!
Inserting low-profile blades into the high-profile blade holder CE
• When using low-profile blades, the red guide (blade rest) (→ "Fig. 32") must first be placed in the
blade holder, followed by the blade.
Fig. 32
Two magnets
(→ "Fig. 33")
operator after the guide has been inserted (towards the rear pressure plate).
Leica CM1520
9
4
(→ "Fig. 31-10")
(→ "Fig. 31-4")
11
are attached to the rear side of the guide. These point away from the
Daily Use of the Instrument
10
clockwise to clamp (→ "Fig. 31").
back to the right (towards the blade) using the
10
7
43
Advertisement
Table of Contents
