Identification Parameters - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Configuration
Online Parameterization
Note!
Some options are only available during online parameterization. These options are pointed out
in the relevant sections.
1. Right-click the device in the PACTware project view.
2. Select Connect.
A connection to the device is established.
3. Right-click the device in the PACTware project view.
4. Select Parameter > Online Parameterization.
The window containing the online data opens and the data is read from the device.
5. Modify a parameter by typing in a new value or choosing a new value from the drop-down
list.
6. To accept the new value, press Enter.
The new value is stored in the device immediately.
7. After all parameter changes have been made, you can load the online configuration into the
PACTware project. To do this, right-click on the device entry in the project view and choose
Load from device.
8. Save your project by choosing File > Save.
5.3

Identification Parameters

The identification parameters provide various information about the device and identify the
device within the network.
Figure 5.4 Identification parameters
39