Diagnostics - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Operation
Note!
If using the DTM and PACTware to configure the WirelessHART gateway, the following data is
available only during online parameterization.
Simulation Parameters
Parameter
Simulation
Simulated Device
Variable
Simulated Value
Execute Simulation
6.4

Diagnostics

The Diagnostics function provides detailed information about the device, wireless/wired
communication and health status.
Note!
Available Only Online (DTM)
If using the configuration via DTM and PACTware
online. See chapter 5.2
Accessing the Diagnostics Window
1. Right-click the device in the PACTware
2. Select Diagnostics.
Description
Enable or disable simulation mode.
Select the device variable to be simulated.
Current Temperature
Temperature min: Minimum temperature of the adapter since last
temperature reset
Temperature max: Miaximum temperature of the adapter since last
temperature reset
Battery voltage
Consumed Energy
RSL of best neighbour (RSL = Received Signal Level)
RSL of second best neighbour
Battery voltage with load
Battery voltage without load during battery test
Normalized Consumed Energy
Estimated Lifetime
Loop Current
Enter simulated value.
Press this button to start simulation when simulation mode enabled.
TM
TM
project tree.
the Diagnostics function is available only
63