WHA-ADP2-F8B2-*-**-Z1(-EX1)
Product
2.2
Functional Overview
The WirelessHART adapter is an intelligent interface module that connects HART and
4 ... 20 mA devices to a WirelessHART network. It transmits the measurement and diagnosis
information acquired from the connected device(s) to a host application via the WirelessHART
Gateway.
Key Functions
May be connected directly to a HART device or mounted separately. Up to 4 HART
devices may be connected.
LEDs for supply status, communication status and device status indication.
Provides loop-power to the connected device. Alternatively, the connected device may be
powered externally.
Battery life estimation and "Low Battery" alarm
2.3
Scope of Delivery
The scope of delivery of the WirelessHART adapter includes:
WirelessHART Adapter with installed battery unit W-BAT-B2-Li, if ordered
Short instructions and CD-ROM
Depending on the order, the delivery may also include the following:
Wall/pipe mounting kit
38 cm cable for connecting the adapter to a field device
A connection adapter for connecting to the cable entry of a field device:
M20/M20 or M20/G 1/2 with two Viton gaskets, M20/NPT 1/2 or M20/NPT 3/4 with one
Viton gasket.
Cable gland
11