Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 68

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Operation
Installation faults, fault during start-up
Faults due to process influence, faults due to non-compliance with specified operating
conditions.
HART
Figure 6.9
Diagnosis - Health Status - HART
Parameter
Configuration Change
Counter
Configuration Changed
Flag
Reboot Counter
Device Specific Status 0
Device Specific Status 1
Device Specific Status 2
Device Specific Status 3
Device Specific Status 4
Extended Device Status
Standardized Status 0
Analog Channel
Saturated
Standardized Status 2
Standardized Status 3
Real Time Clock
68
Diagnosis > Health Status > HART
Description
Counter which increments by one on every change in adapter
configuration.
Indicates a change in configuration since the last call up.
Counter which increments by one on every reboot of the adapter.
Indicates network status.
Indicates wired communication status.
Indicates internal wireless communcation module status.
Indicates status of current signal of the connected device.
Indicates a device malfunction.
Indicates the general status of the device.
Indicates the status of the adapter.
Indicates that current signal of the connected device is overrange.
Indicates the standardized status of the wired (HART) connection.
Indicates the standardized status of the network.
Current time.