Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 29

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Commissioning
Danger!
Possible damage because of wrong battery
The use of batteries other than specified may cause damage to the device.
Only use batteries of type W-BAT-B2-Li from Pepperl+Fuchs.
Warning!
Caustic battery acid
Leaking battery acid can cause personal injury and damage to the device.
Never use batteries that are leaking.
Never use batteries with external damage such dents or deep scratches, even if no
battery acid is leaking.
Danger!
Electrostatic discharge hazard
The device contains non-conductive plastic parts. Care must be taken when operating the
installed device because of possible electrostatic charges. Electrostatic charged surfaces may
cause an ignition spark.
Electrostatic charges must be avoided. For example, do not rub the device and never clean
plastic surfaces with a dry cloth. Always use a damp cloth instead.
Note!
You may open the housing and connect/disconnect the battery in Zone 1.
Connecting the battery
The adapter is delivered with the battery unit installed but not connected. It is connected as
follows.
1. If necessary, open the adapter cover by unscrewing the four captive Phillips screws.
Figure 3.16 on page 26
2. Plug the battery cable into the battery connector.
see
29