Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 33

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Commissioning
Adding HART Communication DTM
Note!
The HART Communication DTM is not included in the WirelessHART DTM Collection. It can be
downloaded separately from www.pepperl-fuchs.com.
1. Select the entry HOST PC in the project view of your PACTware
2. Choose Device > Add device or click the Add device icon on the toolbar.
The Device for window appears.
Figure 4.2
3. Select the entry HART communication.
4. Click OK.
The HART communication DTM is added to the project.
Figure 4.3
5. To edit the parameters, double-click on the HART communication DTM.
The parameter window appears.
Device selection
HART Communication DTM in project view
TM
project.
33