Table of Contents
Advertisement
WHA-ADP-*
Configuration
5.3
Identification Parameters
The identification parameters provide various information about the device and identify the
device within the network.
Figure 5.4: Identification parameters
Identification Parameters
Parameter
Long Tag
Device Tag
Descriptor
Date Code
Message
Polling Address
Serial Number
Order Code
Order Ident
Description
Identifies the device in a WirelessHART network. Enter up
to 32 characters.
Identifies the field device within the process plant. Enter up
to 8 characters.
Further description of the device. Enter up to 16
characters.
Date of last parameter change. Format: DD.MM.YYYY
User defined message. Enter up to 32 characters.
HART address of the adapter on the wired interface, valid
range 0 ... 63. Since the long tag and MAC address are
used to identify the device in the WirelessHART network, it
is not necessary to give different devices different polling
addresses.
Serial number of the device as read from the adapter.
Order code of the device as read from the adapter.
Order identification of the device as read from the adapter.
Default
–
–
–
01.04.2
009
–
15
44
Advertisement
Table of Contents
