Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 36

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Commissioning
Entering Network ID and Join Key
1. In the PACTware
lessHART network.
Figure 4.5
2. Choose Connect.
A connection is established.
3. To open the online parameterization window, right-click the device DTM and choose
Parameter > Online parameterization.
The online parameterization window appears.
4. In the online parameterization window, choose Wireless Communication.
The wireless communication parameters are displayed.
5. Enter the Network ID into the Network Identification field and press Enter to confirm the
new value.
6. Enter the Join Key into the 4 Join Key fields and press Enter to confirm the new value.
7. Click Execute Join.
The device attempts to join the wireless network. The connection status is indicated by
Join Status.
36
TM
project, right-click the DTM of the device that shall join the Wire-
DTM of the WirelessHART Temperature Converter in the PACTware
TM
project view