Updating The Dtm Catalog; Creating A New Project In Pactwaretm; Creating A New Project; Adding The Communication Dtm - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Commissioning
Processor: 500 MHz or faster
Memory: 256 MB RAM or more
Disk space: 200 MB or more
Graphics resolution: 1024 x 768 or higher
Administrator privileges to enable software installation
Install the DTM Software Components
1. Install the Microsoft
lowing the installation instructions given on the screen.
2. Install PACTware
instructions given on the screen.
3. Install the WirelessHART DTM collection by starting the corresponding setup.exe file and
following the installation instructions given on the screen.
4. Install the HART CommDTM by starting the corresponding setup.exe file and following the
installation instructions given on the screen.
You have installed the required software.
4.4.3

Updating the DTM Catalog

Once you have installed the FDT base application and the Device Type Manager (DTM) on the
computer, the FDT base application's DTM catalog must be updated. The PACTware
catalog is called "Device Catalog" and is normally automatically updated when PACTware
launched.
If PACTware
Updating the Device Catalog
1. Start PACTware
2. Select View > Device Catalog or click Device Catalog in the icon bar.
The Device Catalog window opens.
3. Click Update Device Catalog to update the device catalog.
4. Click Yes to continue.
The updated device catalog appears.
4.5 Creating a new Project in PACTware
4.5.1

Creating a New Project

Creating a new project in PACTware
Select File > New or click
A new, unnamed project appears in the main window. The project initially consists of the
entry HOST PC.
4.5.2

Adding the Communication DTM

A communication DTM is an interface between the FDT frame application and the device DTM.
The communication DTM enables communication between the device DTM and the device
connected to the PC.
For the PC to communicate with the device via the HART modem, a HART communication
DTM has to be added to the PACTware
32
®
.NET Framework by starting the corresponding setup.exe file and fol-
TM
by starting the corresponding setup.exe file and following the installation
TM
does not update the device catalog automatically, proceed as follows.
TM
.
Create New Project.
TM
TM
?
TM
project.
TM
DTM
TM
is