Joining The Wireless Network - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Commissioning
Adding the Device DTM
You may add the adapter to your PACTware
documentation). One of them is described in the following.
1. In the project view, right-click on the entry of the HART communication DTM.
2. To add the device DTM, choose Add device.
The Device for window opens.
3. Select WHA-ADP.
4. Click OK.
The device DTM is added to the project. You may continue with parameterizing the
adapter as described in the following.
5. Remember to save your PACTware
4.6

Joining the Wireless Network

To connect itself to the WirelessHART network, the device must carry the correct Network ID
and Join Key. The Network ID and Join Key have to be configured using a wired connection
before the device joins the WirelessHART network for the first time.
To enter Network ID and Join Key, the following requirements have to be met.
A PC/Laptop is connected to the device using a HART modem.
A PACTware
has been created.
In the joining phase the device sends a join request packet to the network manager. If the new
device can be authenticated, the network manager responds with an activation packet and sets
up links between the new device and other existing nodes. Furthermore, the new device
receives a 128 Bit encryption key.
TM
TM
project from time to time (File > Save).
TM
project containing the HART communication DTM and the device DTM
project in various ways (see PACTware
TM
35