Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 40

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Configuration
Identification Parameters
Parameter
Long Tag
Device Tag
Descriptor
Date Code
Message
Polling
Address
Country Code Select the country code of the country in which the device is
SI Units only
40
Description
Identifies the device in a WirelessHART network. Enter up to
32 characters.
Identifies the field device within the process plant. Enter up to
8 characters.
Further description of the device. Enter up to 16 characters.
Date of last parameter change. Format: DD.MM.YYYY
User defined message. Enter up to 32 characters.
HART address of the adapter on the wired interface, valid
range 0 ... 63. Since the long tag and MAC address are used
to identify the device in the WirelessHART network, it is not
necessary to give different devices different polling
addresses.
operated from this drop-down list.
Governs the signal strength that can be set for the device
Determines the preset value for "SI Units only"
Selects the unit set to be used by the adapter.
Unit codes restricted to SI units only: only SI units are
displayed
No restrictions: Both metric and US units are displayed
Default
–
–
–
01.04.2009
–
15
–