Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual page 45

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Configuration
Parameter
Scan Subdevices Press the button to scan the connected HART devices. The
Field Device Table Displays the parameters read from the HART device by the
Description
devices found, together with their parameters, are displayed in
the Field Device Table.
If the HART device is disconnected or its configuration
changed, a new scan must be made
Note: A scan is made every time the adapter is powered up
after connection of the battery – the table then fills
automatically.
scan.
Manufacturer ID: Manufacturer of connected device.
Expanded Device Type Code: Device identifier as per
HART.
Device ID: Manufacturer's device identifier.
Universal Command Revision Level: HART revision
supported.
Long Tag: Long tag of device (Message for HART revision
< 6.0).
Start-Up Voltage: Voltage required to start the connected
device.
Start-Up Time: Time required for the device to wake-up
Start-Up Current: Current consumed on starting the device
Lead Time: Time that elapses between start-up and the
point at which the device can deliver valid values. See
chapter 5.8
Default
45