Reference To Further Documentation; Marking; Intended Use; Improper Use - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Safety
1.4

Reference to Further Documentation

Observe laws, standards, and directives applicable to the intended use and the operating
location. Observe Directive 1999/92/EC in relation to hazardous areas.
The corresponding datasheets, manuals, declarations of conformity, EU-type examination
certificates, certificates, and control drawings if applicable (see datasheet) are an integral part
of this document. You can find this information under www.pepperl-fuchs.com.
Due to constant revisions, documentation is subject to permanent change. Please refer only to
the most up-to-date version, which can be found under www.pepperl-fuchs.com.
1.5

Marking

WirelessHART
WHA-ADP2-F8B2-0-P0-Z1-EX1
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
EC-Type Examination Certificate: BVS 17 ATEX E 029 , for additional certificates see
www.pepperl-fuchs.com
II 2 G Ex ia IIC T4/T3 Gb
WirelessHART
WHA-ADP2-F8B2-0-A0-Z1-EX1
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
EC-Type Examination Certificate: BVS 17 ATEX E 029 , for additional certificates see
www.pepperl-fuchs.com
II 2 G Ex ia IIC T4/T3 Gb
II 2 D Ex tb [ia] IIIC T70°C Db
1.6

Intended Use

The device is only approved for appropriate and intended use. Ignoring these instructions will
void any warranty and absolve the manufacturer from any liability.
The device must only be operated in the specified ambient temperature range and at the
specified relative humidity without condensation.
The device is used in control and instrumentation technology (C&I technology) for wireless data
transfer from HART devices.
Take the intended use of the connected devices from the corresponding documentation.
1.7

Improper Use

Protection of the personnel and the plant is not ensured if the device is not used according to its
intended use.
®
-Adapter
®
-Adapter
7