Simulation - Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Manual

WHA-ADP2-F8B2-*-**-Z1(-EX1)
Operation
Accessing the Measured Value Window
1. In the PACTware
A context menu opens.
2. Select Measured Value.
The Measured Value window appears.
Figure 6.2
6.3

Simulation

Adapter parameters can be simulated for test and commissioning purposes. When the
simulation is activated, the required parameter can be selected from a drop-down list. After a
value has been assigned, the simulation is started by pressing Execute Simulation.
Figure 6.3
62
TM
project, right-click on the device.
Measured value
Simulation