Getting Started
This manual covers installation and use of the HW-130 Programmer
and its interface software, which are designed to program Xilinx
programmable device families on PCs running DOS, Windows,
SunOS, Sun Solaris, HP, or IBM UNIX workstations.
The HW-130 Programmer is a desktop unit that communicates with a
host computer system by means of an RS-232 serial port using the
HW-130 Programmer software.
The interface software enables you to select a device and download
its algorithm to the HW-130 Programmer, ensure that the device is
blank, program the device, and verify that the device has been
programmed correctly.
Hardware and Software Requirements
The following are the minimum requirements needed for the
different systems.
PC Installations
If you have a PC, ensure your system meets the following system
requirements.
HW-130 Programmer User Guide
Installation of the HW-130 Programmer and interface software is
covered in this chapter.
Programming procedures are covered in the "Programmer
Operations" chapter.
An alphabetical list and description of commands are included in
the "Command Reference" chapter.
PC 80286 and higher
Chapter 1
1-1