Loading A Profile; Deleting A Profile; Programming The Device (Ctrl-P) - Xilinx HW-130 User Manual

HW-130 Programmer User Guide
Loading a Profile
To load a profile, follow these instructions:
1. Select Profile
2. Locate the profile you want.
3. Double-click on the profile you wish to load.
Deleting a Profile
To delete a profile, follow these instructions:
1. Select Profile
2. Locate the profile you want.
3. Double-click on the profile to delete.

Programming the Device (Ctrl-P)

Use the Program Device command to program one or more devices.
This command is available only if you have specified a device. This
procedure also assumes you have specified a design file.
1. Specify the number of devices to program in the Quantity field
2. Select the Program Device command from the Options menu or
Figure 2-8 Program Device Toolbar Button
2-6
include in your profile. If everything is correct, click on OK. Use
the Change button to modify any incorrect information.
The software prompts you to choose a profile name. Select a file
name and click on OK. All profiles have a .pro extension.
Load from the File menu.
Delete from the File menu.
The software prompts you to confirm that this is the file that you
wish to delete. If it is, click on OK. If it is not the correct file, click
on Cancel and reselect.
of the HW-130 display.
click on the Program Device toolbar button shown in
Figure 2-8.
Xilinx Development System