Select Device (File Menu); Signature String (Options Menu); Sound (Options Menu); Verify Device (Options Menu) - Xilinx HW-130 User Manual

HW-130 Programmer User Guide
are using the DOS version of the program, you can also save the color
settings that you specified.

Select Device (File Menu)

Use this command to select the type of device you want to program.
When you select a device, the program downloads the device
algorithm into the programmer memory.
Figure 3-14 Select Device Toolbar Button

Signature String (Options Menu)

Use this command to display the signature of EPLD/CPLD devices.
Figure 3-15 Signature String Toolbar Button

Sound (Options Menu)

Use this command to set the sound on or off. When sound is set to on,
the program emits a sound whenever you encounter an error.

Verify Device (Options Menu)

Use this command to compare a programmed device to the file
currently loaded in the programmer memory. This command is
available only if you have selected a device.
Figure 3-16 Verify Device Toolbar Button
You can use this command to verify that your device was successfully
programmed. You can also use this command to compare one device
to another. After programming a device, replace the current device
3-10 Xilinx Development System