HW-130 Programmer User Guide
continues to run until you cancel it by clicking on the Cancel button.
Figure B-3 Diagnostics Dialog Box
RS-232 Serial Communications Test
This test allows you to verify the RS-232 port on the host system at
various baud rates.
1. Select RS-232 Serial Communications from the Diagnostics
2. Specify the baud rate and the communications port.
3. Click on OK to close the Communications dialog box and start the
Each time you complete a test, you are informed whether the test was
successful or not. A message is displayed if a communication error
occurs.
B-4
dialog box.
The Communications dialog box is opened.
test.
The host and the HW-130 Programmer transmit and receive data
at the set baud rate until you cancel the test.
Xilinx Development System