Starting The Program - Xilinx HW-130 User Manual

2. Type the following to invoke Windows:
3. Select Run from the File menu of the Program Manager.
4. Type the following information in the Run dialog box.
Figure 1-3 Installation Dialog Box
5. Click OK to accept the default installation directory or type the

Starting the Program

After finishing the installation, start the program as follows:
1. Turn on the power on the HW-130 Programmer.
2. Open the Xilinx HW-130 Programmer group and click on the
Figure 1-4 HW-130 Programmer Icon
HW-130 Programmer User Guide
drive (typically A:). If you are using a CD-ROM, insert the CD into
the CD-ROM drive (typically D:).
win↵
a:\setup.exe↵ (diskette)
d:\windows\setup.exe (CD-ROM)
The HW-130 Installation dialog box is displayed as shown in
Figure 1-3.
name of the drive and directory in which you want to install the
HW-130 Programmer software.
following icon within that program group.
Getting Started
1-7