Reset Programmer (Options Menu); Save Ram To File (File Menu); Save Settings (File Menu) - Xilinx HW-130 User Manual

type.
Figure 3-12 Program Device Toolbar Button
The program executes the following operations: blank check,
program, verify, and device checksum. You can use this command
after using any one of the following commands that load a design file
into the programmer memory: Open File, Load Profile, Append Data,
and Load Master.
If programming is successful, the program updates the Pass field;
otherwise, it updates the Fail field.

Reset Programmer (Options Menu)

Use this command to reset the programmer. This command is
equivalent to turning the programmer off and on again.

Save RAM to File (File Menu)

Use this command to save the contents of the programmer memory
to a file.
Figure 3-13 Save RAM to File Toolbar Button
You can use this command after using any of the commands that load
data in the programmer memory: Open File, Append Data, and Load
Master.
Specify the name of the file in which the RAM data is to be saved as
well as the file extension. The file extension can be .tek, .mcs, .exo,
.prg or .jed and represents a file format in which to save the file.

Save Settings (File Menu)

Use this command to save the programmer settings, such as the port,
baud rate, and sound options. The data is saved to hw130.ini. If you
HW-130 Programmer User Guide
Command Reference
3-9