Loading The Device (Ctrl-L); Verifying The Device (Ctrl-V); Comparing A Device To A File - Xilinx HW-130 User Manual

HW-130 Programmer User Guide
5. Repeat the previous step until you have programmed all the
When you program a device, the software completes the following
operations: Blank Check, Program, Verify, and Checksum calculation.

Loading the Device (Ctrl-L)

Use the Load Master Device command to load the contents of a
master device into the programmer memory.
1. Place the device you wish to load in the socket adapter.
2. After inserting the device in the socket, select the Load Master
Figure 2-9 Load Master Toolbar Button

Verifying the Device (Ctrl-V)

Use the Verify Device command to compare a programmed device to
the data pattern that has already been loaded into the programmer
memory.
Figure 2-10 Verify Device Toolbar Button

Comparing a Device to a File

You can compare a programmed device against a file.
2-8
devices.
Device command from the Options menu or click on the Load
Master toolbar button shown in Figure 2-9.
The software reads the device and copies its contents into the
programmer memory. The device checksum field and the device
reset polarity field for certain devices are updated. You can use the
data to program other devices or to verify other programmed
devices against it.
Xilinx Development System