R
ML40x Getting Started Tutorial
Overview
The ML40x evaluation platform (the board) comes with a number of pre-installed
demonstration programs. This tutorial guides you through these demonstrations and
provides instructions to run them on the ML401, ML402, ML403, and ML405 evaluation
platforms. Differences between these boards are noted when necessary.
Some demonstrations interact with a PC or an external device. For these demonstrations,
use a computer installed with:
•
•
The following additional equipment is also recommended:
•
•
•
•
•
•
For current information about ML40x evaluation platforms, visit the corresponding Web
page:
•
•
•
•
ML40x Getting Started Tutorial
UG083 (v5.0) June 30, 2006
ISE software version 8.1i
ChipScope™ Pro software version 8.1i
VGA monitor and cable
PC speaker with audio cable
Ethernet port and an RJ-45 Ethernet cable
USB keyboard (without a built-in USB hub)
Null modem serial cable
CompactFlash (CF) reader/writer for the PC
ML401:
http://www.xilinx.com/ml401
ML402:
http://www.xilinx.com/ml402
ML403:
http://www.xilinx.com/ml403
ML405:
http://www.xilinx.com/ml405
www.xilinx.com
9