Alphabetical Listing Of Commands; About Hw-130 (Help Menu); Append Data (File Menu); Auto-Calibration (Options Menu) - Xilinx HW-130 User Manual

Alphabetical Listing of Commands

This section lists the menu commands of the HW-130 software
program.

About HW-130 (Help Menu)

Use this command to display the program version, as shown in
Figure 3-1.
Figure 3-1 About HW-130 Dialog Box

Append Data (File Menu)

Use this command to combine two files and download them into the
programmer memory. You can then save the RAM data into a file or
use that data to program devices. This command is available after
you have specified a device type.
Figure 3-2 Append Data Toolbar Button

Auto-Calibration (Options Menu)

Use this command to measure the voltage and current for each power
supply. When you select this command, the Auto-Calibration dialog
box is opened showing the status of the available supplies of the
programmer. You must use the calibration adapter for this operation.
HW-130 Programmer User Guide
Command Reference
3-3