This guide will show you how to setup your computer and Ultra96 board to get started using PYNQ.
For information on the Ultra96 board, see the Avnet page:
1.1 Getting Started Video
You can watch the getting started video guide, or follow the instructions below.
1.2 Ultra96 Setup Guide
The PYNQ environment can be accessed using a web browser over a network connection. You can connect to the
board in three main ways:
• USB cable (preferred)
• Use the board's WiFi access point
• Connect a monitor, keyboard and mouse directly to the board.
All three connection methods will be covered below. USB cable is the recommended way to start using PYNQ on the
Ultra96.
http://zedboard.org/product/ultra96
1
CHAPTER
Getting Started
3