Inspection, Transport And Storage; Warranty And Liability - Bender ISOMETER IRDH575 Manual

Important information
Sale and delivery conditions can be obtained from Bender in printed or elec-
tronic format.

1.5 Inspection, transport and storage

Inspect the dispatch and equipment packaging for damage, and compare the
contents of the package with the delivery documents. In the event of damage
in transit, please contact Bender immediately.
The devices must only be stored in areas where they are protected from dust,
damp, and spray and dripping water, and in which the specified storage tem-
peratures can be ensured.

1.6 Warranty and liability

Warranty and liability claims in the event of injury to persons or damage to
property are excluded if they can be attributed to one or more of the follow-
ing causes:
Improper use of the device.
 
Incorrect mounting, commissioning, operation and maintenance of the
 
device.
Failure to observe the instructions in this operating manual regarding
 
transport, commissioning, operation and maintenance of the device.
Unauthorised changes to the device made by parties other than the
 
manufacturer.
Non-observance of technical data.
 
Repairs carried out incorrectly and the use of replacement parts or
 
accessories not approved by the manufacturer.
Catastrophes caused by external influences and force majeure.
 
Mounting and installation with device combinations not recom-
 
mended by the manufacturer.
This operating manual, especially the safety instructions, must be observed by
all personnel working on the device. Furthermore, the rules and regulations
that apply for accident prevention at the place of use must be observed.
IRDH575_D00089_05_M_XXEN/01.2020
11