Training Courses And Seminars; Delivery Conditions; Inspection, Transport And Storage; Warranty And Liability - Bender ISOMETER isoES425 Manual
Insulation monitoring device for unearthed ac-, ac/dc and dc systems for energy storage devices up to ac/dc 400v
Hide thumbs
Also See for ISOMETER isoES425:
- Quick start manual (41 pages) ,
- Manual (24 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
General information
1.5
Training courses and seminars
Regular face-to-face or online seminars for customers and other interested parties:
www.bender.de > know-how > seminars.
1.6
Delivery conditions
The conditions of sale and delivery set out by Bender GmbH & Co. KG apply. These can be obtained in printed
or electronic format.
The following applies to software products:
'Software clause in respect of the licensing of standard software as part of deliveries,
modifications and changes to general delivery conditions for products and services in the
Die Elektroindustrie
electrical industry'
1.7
Inspection, transport and storage
Check the shipping and device packaging for transport damage and scope of delivery. In the event of
complaints, the company must be notified immediately, see "www.bender.de > service & support.".
The following must be observed when storing the devices:
1.8
Warranty and liability
Warranty and liability claims for personal injury and property damage are excluded in the case of:
• Improper use of the device.
• Incorrect mounting, commissioning, operation and maintenance of the device.
• Failure to observe the instructions in this operating manual regarding transport, commissioning, operation
and maintenance of the device.
• Unauthorised changes to the device made by parties other than the manufacturer.
• Non-observance of technical data.
• Repairs carried out incorrectly.
• The use of accessories or spare parts that are not provided, approved or recommended by the
manufacturer.
• Catastrophes caused by external influences and force majeure.
• Mounting and installation with device combinations not approved or recommended by the manufacturer.
This operating manual and the enclosed safety instructions must be observed by all persons working with the
device. Furthermore, the rules and regulations that apply for accident prevention at the place of use must be
observed.
6
isoES425_D00214_01_M_XXEN/10.2023
Advertisement
Table of Contents
Need help?
Do you have a question about the ISOMETER isoES425 and is the answer not in the manual?
Questions and answers