Disposal - Bender ISOMETER IRDH575 Manual

Insulation monitoring device for it ac and dc systems with integrated test generator and controller for eds46..., eds47... and eds49... systems
Table of Contents

Advertisement

1.7 Disposal

Abide by the national regulations and laws governing the disposal of this de-
vice. Ask your supplier if you are not sure how to dispose of the old equip-
ment.
The directive on waste electrical and electronic equipment (WEEE directive)
and the directive on the restriction of certain hazardous substances in electri-
cal and electronic equipment (RoHS directive) apply in the European Commu-
nity. In Germany, these policies are implemented through the "Electrical and
Electronic Equipment Act" (ElektroG). According to this, the following applies:
Electrical and electronic equipment are not part of household waste.
 
Batteries and accumulators are not part of household waste and must
 
be disposed of in accordance with the regulations.
Old electrical and electronic equipment from users other than private
 
households which was introduced to the market after 13 August 2005
must be taken back by the manufacturer and disposed of properly.
For more information on the disposal of Bender devices, refer to our
homepage at www.bender-de.com -> Service & support.
12
Important information
IRDH575_D00089_05_M_XXEN/01.2020

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ISOMETER IRDH575 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF