Display In The Menu Mode; Function Keys - Bender ISOMETER IRDH575 Manual

7
= Polarity of the test current pulse
.
= valid RS-485 traffic
H = a new entry is made in the memory data base
C = flashing, if the clock has to be set
Messages:
8
- Insulation fault
- Connection system?
- Connection PE?
- Device error x
- ****STANDBY*****
6.1.2

Display in the menu mode

6.1.3

Function keys

Two functions are assigned to each function key. In addition to the basic func-
tion marked with a circle, the keys allow navigation within the menu.
41
Operation and setting
Parameter change is permitted
Parameter change is blocked,
enabling by a password
IRDH575_D00089_05_M_XXEN/01.2020