Standards, Approvals And Certifications - Bender ISOMETER IRDH575 Manual

Technical data IRDH575

9.2 Standards, approvals and certifications

The ISOMETER® was designed under consideration of the following standards:
- DIN EN 61557-8 (VDE 0413-8): 2015-12
- DIN EN 61557-8 Ber 1 (VDE 0413-8 Ber 1): 2016-12
- IEC 61557-8: 2014
- IEC 61557-8: 2014/COR1: 2016
- DIN EN 61557-9 (VDE 0413-9): 2015-10
- IEC 61557-9: 2014
Subject to change! The specified standards take into account the edition valid
until 01.2020 unless otherwise indicated.
95
IRDH575_D00089_05_M_XXEN/01.2020