Delivery Conditions; Inspection, Transport And Storage; Warranty And Liability; Disposal Of Bender Devices - Bender ISOMETER isoGEN423 Manual

General information
1.6

Delivery conditions

The conditions of sale and delivery set out by Bender GmbH & Co. KG apply. These can be obtained in printed
or electronic format.
The following applies to software products:
'Software clause in respect of the licensing of standard software as part of deliveries,
modifications and changes to general delivery conditions for products and services in the
Die Elektroindustrie
electrical industry'
1.7

Inspection, transport and storage

Check the shipping and device packaging for transport damage and scope of delivery. In the event of
complaints, the company must be notified immediately, see "www.bender.de > service & support.".
The following must be observed when storing the devices:
1.8

Warranty and liability

Warranty and liability claims for personal injury and property damage are excluded in the case of:
• Improper use of the device.
• Incorrect mounting, commissioning, operation and maintenance of the device.
• Failure to observe the instructions in this operating manual regarding transport, commissioning, operation
and maintenance of the device.
• Unauthorised changes to the device made by parties other than the manufacturer.
• Non-observance of technical data.
• Repairs carried out incorrectly.
• The use of accessories or spare parts that are not provided, approved or recommended by the
manufacturer.
• Catastrophes caused by external influences and force majeure.
• Mounting and installation with device combinations not approved or recommended by the manufacturer.
This operating manual and the enclosed safety instructions must be observed by all persons working with the
device. Furthermore, the rules and regulations that apply for accident prevention at the place of use must be
observed.
1.9

Disposal of Bender devices

Abide by the national regulations and laws governing the disposal of this device.
For more information on the disposal of Bender devices, refer to
www.bender.de > service & support.
6 isoGEN423_D00221_05_M_XXEN