11.92
9.1.12 Display "Manual unloading via loading point"
AUTOMATIC
Manual unloading via loading point:
T No.:
102
Size:
Geometry:
1000
L1:
L2:
100
R:
Spec. tool life:
Spec. tool life:
The recall key is unassigned in this display. A return to a higher menu level is possible only
with the function keys "Acknowledge" or "Abort".
Softkey "ACKNOWLEDGE"
A check is made whether the T and Duplo No. entered in the loading line are entered at the
loading point. If this is the case, the magazine location is deleted and the D Nos. of the
reference list released.
Return to the next highest level in the menu tree and display of the loading line with the data
deleted.
Softkey "ABORT"
Return to the next highest level in the menu tree and display of the loading line with the data
deleted.
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Duplo No.:
Type:
33
Cutting edge No.:
Wear:
Prewarning limit tool life:
1000
1000
6FC5 197-0AA40-1BP1
9.1.12 Display "Manual unloading via loading point"
1
2
1
0.001
L1:
L2:
0.001
R:
0.001
ACKNOWL-
ABORT
EDGE
9 Examples
1.1
50
9–13