Siemens SINUMERIK 840 Planning Manual page 52

11.92
FB 138: Determine free dynamic buffer÷
FB 139: Data distributor
FB 140: Job analysis (subroutine for FB 139)
FB 141: Command code 0 to 10 (subroutine for FB 139)
FB 142: Command code 1 to 4 (subroutine for FB 139)
FB 143: Command code 5 to 7 (subroutine for FB 139)
FB 144: Command code 8 to 9 (subroutine for FB 139)
FB 150: User bit routing - loading (user FB)
FB 151: User bit routing - unloading (user FB)
FB 152: Disable/enable adjacent locations
FB 153: Add up adapter data of a tool (general subroutine)
FB 154: Load and unload tool identifications
FB 155: Tool input via tape
FB 156: Tool life monitoring/prewarning limit
FB 157: Monitor for number of pieces/prewarning limit
FB 158: Disable marked tools
FB 159: Fast BCD DUAL conversion and vice versa (general subroutine)
FX 7: Simulation of part programs (SINUMERIK 880/880 GA2 only)
FX 8: Presetting of tool size via EPROM
List of the function blocks in package 2
FB 197: Load tool list
FB 198: Generate exchange list, list of missing tools
FB 199: FIFO
_______
1) Package 2 applies to SINUMERIK 880/880 GA2 only
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
1)
6FC5 197-0AA40-1BP1
3 Guidelines
3.2.2 Functions
3–7