Display "Selection 2" - Siemens SINUMERIK 840 Planning Manual

11.92
9.1.18 Display "Selection 2" (SINUMERIK 880/880 GA2 only)
AUTOMATIC
Selection:
Service: Unload to
NC program
Lists
SERVICE UNLOAD
LISTS MAGAZINE
Softkey "SERVICE LISTS"
Provides the display "Service" for selecting the service lists to be displayed (exchange list, list
of missing tools and tool list).
Softkey "DISPLAY P MEM."
Provides the display "Display P memory" after magazine and locator number have been
entered.
Return to display "Selection" by pressing the ECT key.
Displays cannot be selected for fictitious magazines. A message is output.
Softkey "UNLOAD MAGAZINE"
Provides the display "Unload to NC program" for selecting the unloading type (unloading of
defined magazines or unloading of marked tools from all magazines).
Softkey "MARK TOOLS FOR UNLOADING"
Provides the display "Mark tools" in which the tools to be unloaded are marked after the
magazine and location number has been entered.
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Mark
tools
Magazine
Location
UNLOAD
TO. MARK.
6FC5 197-0AA40-1BP1
9 Examples

9.1.18 Display "Selection 2"

1.1
Display
P memory
Magazine 1
Location 1
DISPLAY
P MEM.
9–19