Display "Loading/Unloading Spindle" - Siemens SINUMERIK 840 Planning Manual

11.92

9.1.14 Display "Loading/unloading spindle"

AUTOMATIC
Loading/unloading spindle:
T No.:
Size:
Geometry:
1200
L1:
L2: 750
R:
Spec. tool life:
Spec. tool life:
LOAD UNLOAD
Softkey "LOAD"
Provides the display "Loading spindle". A check is made whether the spindle is assigned. If
not, a search for an empty location is initiated. The tool size entered in the loading line is
referred to when searching for a location of suitable size. The search for an empty location
only covers the loading magazine (defined in the machine data, currently DW 136 of DB 146).
The empty location found is reserved for the tool change. The control bit "Load location" is
output at the interface (signals to user DW 2...DW 5 in DB 146). If no empty location is found,
the process must be aborted.
Softkey "UNLOAD"
Transfers the display "Unloading spindle", after entry of the T No. and Duplo No., to the
loading line. The data of the tool to be unloaded are displayed. The control bit "Unload
location" is output at the interface (signals to user DW 2...DW 5 in DB 146).
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Duplo No.:
1
Type:
11
Cutting edge No.:
Wear:
Prewarning limit tool life:
743
2000
6FC5 197-0AA40-1BP1
9.1.14 Display "Loading/unloading spindle"
1
2
1
0.005
L1:
L2: 0.002
R:
0.001
9 Examples
1.1
100
9–15