Display "Help" - Siemens SINUMERIK 840 Planning Manual

01.91

9.3.12 Display "Help"

AUTOMATIC
Help:
V : Prewarning limit reached
G : Disabled tool
N : Tool not enabled
E : Replacement tool
B : Location occupied
S : Enable workpiece count/tool life
M : Marked tool for unloading
* : Type of monitoring selected
The display "Help" is called via softkey on the SINUMERIK 880/880 GA2.
On the SINUMERIK 840/840C it is called via the "i" key.
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
6FC5 197-0AA40-1BP1
9 Examples
9.3.12 Display "Help"
1.1
9–155