11.92
9.2.17 FB 178 AEN-MAG
Change tool data of magazine assignment
Description
The block selects the relevant tool data in accordance with the cursor position in the "Buffer
assignment" display and initializes the display parameters in the "Change tool data" display.
If the selected magazine is a fictitious magazine, processing is aborted and display of the next
menu is disabled and the corresponding error message output.
In case of an error, an interactive text is output together with an error message.
Block data
Lib. No.
FBs to be loaded
DBs to be loaded
Type of FB call
DBs to be input
Error messages
Block call FB 178
DB 145, DL 41
Signal descriptions
FEHL
The cause of the error is stored as the number of an interactive text in DB 40,
DW 50:
DB 40, DW 50:
ZW
DB 145, DL 41:
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
9.2.17 FB 178 Change tool data of magazine assignment
: 10050
: FB 178, FB 132
: None
: Conditional in FB 160
: None
: 19: No D No. available
32: Fictitious magazine (SINUMERIK 880/880 GA2 only)
FB AEN-MAG
ZW
FEHL
19: No D No. available
32: Fictitious magazine (SINUMERIK 880/880 GA2 only)
Status words for internal statuses
6FC5 197-0AA40-1BP1
DB 40, DW 50
9 Examples
9–95