Fb 177 Anz-Mag Display Tool Data Of Magazine Assignment - Siemens SINUMERIK 840 Planning Manual

9 Examples
9.2.16 FB 177 Display tool data of magazine assignment
9.2.16 FB 177 ANZ-MAG
Display tool data of magazine assignment
Description
FB 177 assigns display parameters to the "Tool data" display in accordance with the selected
cursor position.
The block selects the relevant tool data in accordance with the cursor position in the display
for the magazine assignment and initializes the display parameters in the "Tool data" display.
In case of an error, an interactive text is output together with an error message.
If the selected magazine is a fictitious magazine, processing is aborted and display of the next
menu is disabled and the corresponding error message output.
Block data
Lib. No.
FBs to be loaded
DBs to be loaded
Type of FB call
DBs to be input
Error messages
Block call FB 177
DB 145, DR 41
Signal descriptions
FEHL The cause of the error is stored as the number of an interactive text in DB 40,
DW 50:
DB 40, DW 50:
ZW DB 145, DR 41:
9–92
: 10050
: FB 177, FB 131
: None
: Conditional in FB 160
: None
: 19: No D No. available
32: Fictitious magazine
FB ANZ-MAG
ZW FEHL
19: No D No. available
Status words for internal statuses
© Siemens AG 1991 All Rights Reserved
DB 40, DW 50
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)
11.92