Display "Buffer Assignment - Siemens SINUMERIK 840 Planning Manual

9 Examples

9.1.5 Display "Buffer assignment"

9.1.5 Display "Buffer assignment"
AUTOMATIC
Buffer assignment:
T No.
Spindle
Gripper 1
Gripper 2
Change location
Loading point
DISPLAY CHANGE
T. DATA T. DATA
This display is updated during positioning of the chain magazine.
Softkey "DISPLAY T. DATA"
Provides all the relevant data for the selected tool by evaluating the cursor line position.
The data cannot be changed.
Softkey "CHANGE T. DATA"
Provides all the relevant data for the selected tool by evaluating the cursor line position.
The data of all P memories can be modified.
If cursor is on change position or loading point, only "Display tool data" is possible.
Softkey "HELP" or key "i" for SINUMERIK 840/840C
Provides a description of the abbreviations used in the display.
9–6
Duplo. Size
1 1
1
2
102 1
© Siemens AG 1991 All Rights Reserved
1.1
Status
V G E NF B
11 B
00
00
B
11
B
33
HELP
6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)
11.92