Examples; Operating Example Milling; Description Of The Ws 800 Displays - Siemens SINUMERIK 840 Planning Manual

11.92
9

Examples

9.1

Operating example milling

9.1.1

Description of the WS 800 displays

The operating example is implemented for TO area 1.
After a display has been selected, it is not updated if the actual position of the magazine
and/or magazine assignment changes in the meantime, i.e. the status at the time the display is
selected remains until the display is deselected. Exceptions: The display "Buffer assignment"
and the display "Display exchange list, missing tools, tool list" (package 2) are constantly
updated after being selected since the PLC program is active for the duration of the display
selection.
Definitions of the data structure of the magazine table for a particular operating example:
:
Magazine table
DW 0
DW 1
DW 2
Loading/unloading area
DW 3
DW 4
Buffer
DW 5
DW 6
DW 7
DW 8
:
:
DW n
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
Search key
Search screen form
Loading line
Unassigned
Spindle
Gripper 1
Gripper 2
Magazine area
6FC5 197-0AA40-1BP1
9 Examples
9.1 Operating example milling
9–1