Revision History - Biotek BioStack 4 Operator's Manual

Phone:
Fax:
Email:

Revision History

Rev Date Changes
A 11/2002 First issue.
B 5/2003 Throughout: Clarified the compatibility of the ELx405 with the BioStack by
specifying the Washer's Auto Plate and Select models only. Updated
contact information, Safety Symbols, and Warranty.
C 10/2003 Preface: Updated the Intended Use statement to distinguish between the
European Union and all other jurisdictions.
D 06/2004 Throughout: Reformatted manual for cosmetic effect. Added references
about compatibility of the BioStack with the ELx405 HT and ELx405 Select
CW Microplate Washers. Added new sections about compatibility,
installation, operation, alignment, etc., of the Precision and Precision XS.
Revised the Technical Support section and added new sections on Depot
Service Contracts and Applications Support. Enhanced Introduction,
Installation, Operation, and Maintenance chapters.
E 06/2005 Throughout: Added information on the new barcode scanner and USB port.
Changed ELx405 "Auto" model to "ELx405."
Moved instructions from former Appendix B, Serial Cable Connections and
Appendix C, Mounting the Aligning Plates and Posts into Chapter 3,
Installation.
Chapter 5: Simplified/clarified IQ and OQ sections. Chapter 7: Added KC4
error codes for BioStack operation with readers, and BioStack barcode
scanner error codes.
F 05/2006 Added instructions for using Gen5 software. Preface: Updated safety
information and removed Warranty, Registration Card, and Registration
Online sections in Preface. Added laser beam warning. Appendix B: Added
laser beam warning.
G 07/2006 Added instructions for installing/operating the BioStack with the Synergy 2.
H 12/2006 Added instructions for installing and operating the BioStack with the
NanoQuot. In Chapter 5 and Appendix B: Added the Barcode Scanner Test
as an optional IQ and OQ test.
+49 (0) 7136 9680
+49 (0) 7136 968 111
info@biotek.de
Revision History| vii
BioTek Instruments, Inc.