Package Contents; Optional Accessories - Biotek BioStack 4 Operator's Manual

6 | Chapter 1: Introduction

Package Contents

Part numbers and package contents are subject to change and vary according
n
to instrument model. Please contact BioTek Customer Care if you have any
questions.
BioStack Microplate Stacker (PN BIOSTACK2WR, BIOSTACK3WR, BIOSTACK4)
n
Power supply: 24 volt (PN 01281)
n
Plate stacking pedestal (PN 7312083)
n
Grease kit (PN 7110017)
n
BioStack Operator's Manual (PN 7311000) on USB flash drive (PN 7310571)
n

Optional Accessories

Set of two microplate stacks
l
Stack Type
30-plate
10-plate
50-plate
* These stacks are required for transferring plates with lids. The 50-plate stacks can be used on the
BioStack 4 to process plates only, not plates with lids.
¥ Recommended for low-volume PCR plates.
‡ Also supports up to 44 low-profile, 1536-well plates without lids.
Note: Stack Types are named for the number of plates they can hold without lids.
When using lids, the approximate number of plates with lids the 30-plate stack holds is 25;
for the 10-plate stack, it's 8, depending on the manufacturer. Another limiting factor is
that the total weight of the filled plates in the stack cannot exceed 7.0 lbs (3.2 kg).
BioStack™ Microplate Stacker
¥
Any BioStack
7310008‡
7310030
7310539
BioStack 4*
1230004
1230003
N/A