Biotek BioStack 4 Operator's Manual page 12

x | BioStack Operator's Manual
Rev Date Changes
secure gripper before moving the BioStack 3.
Y 11/2013 Added instructions for installing and operating the BioStack with the
MultiFlo FX. Added Precision Universal models (PRC384U) to the list of
instruments that are not BioStack-compatible. Restored references to, and
added a diagram for 0° integration for liquid handlers and the
BIOSTACK2WR. Added "Space Requirement Dimensions" for most
interfacing instruments.
Z 12/2013 Introduced BioStack 4 and its support of plate lids during processing. Added
hazard label and description: cutting fingers/hand. Added "Plate
Compatibility Test" for BioStack4 only. Added support for the Synergy Neo
- BioStack4 integration.
AA 6/2014 Added support for new instruments: Epoch2 and Synergy HTX. Added a
warning that the PowerWave HT is not compatible with the BioStack 4 and a
"strong recommendation" to measure the plate and lid type before use to
verify they meet the minimum requirements for de-lidding operations with
the BioStack 4.
AB 9/2014 Updated specifications to include certain low-density plates with lids that
are supported in "stay-on lid" mode. Added references to stay-on lid mode
where applicable. Corrected the space requirement for liquid handlers:
increased the depth required by six inches to account for wrist movement.
AC 12/2014 Added support for Cytation 5. Updated the "Stay-on Lid" mode description
to describe the newly relabeled stacks required to support this feature, i.e.,
Tall Lidded Plate Stacks. Updated notice of compliance with EU Directives.
AD 2/2015 Updated Synergy Neo integration instructions to match new and improved
alignment hardware. Added new 28 volt power supply to parts list.
AE 3/2015 Reverted contents to match revision AC.
AF 7/2015 Added support for Synergy Neo2, updated Contact Information, changed
RMA to Service Call Notice (SCN) number, updated Synergy Neo and
Synergy Neo2 integration kit to PN 7310055
AG 2017 Updated PN for replacement shipping materials 7313002 to 1163003;
removed reference to the ANSI standard in the microplate specification sec-
tion; add note to "Install and Run BioStack with the Synergy H1" to point
out position of bracket on alignment plate, which varies depending on
which BioStack is used; added Cytation 1 support; resolved EPR 24692 by
adding error code 2002 to the list; modified instructions for installing soft-
ware and testing communication in the Install and Operate the BioStack
with Precision document; added USB and serial cable part numbers to the
fluid interfacing instrument documents.
BioStack™ Microplate Stacker