Plate Stacked Height - Biotek BioStack 4 Operator's Manual

88 | Chapter 6: Troubleshooting
Instrument
Custom instrument
Custom instrument
Synergy Neo and Synergy Neo2

Plate Stacked Height

Not supported in BIOSTACK2WR and when processing plates with lids.
n
Note: Only offered for computer control and touch screen instruments: you must be
controlling the BioStack with Gen5, LHC, or a touch screen instrument to take advantage
of this option.
For non-standard microplates, the
where to grip the plates to prevent transferring more than one plate at a time. Use
the setting to fine-tune performance for both low-profile and tall plates.
Determine the Plate Stacked Height
: Preferably calipers; otherwise, a ruler or other measuring device.
Tools
Measure 2 plates stacked together
1. Hold two plates nested together as they will sit in the stack, and measure their
height.
2. Then, measure the top plate by itself.
3. Subtract the measurements to determine the "plate stacked height" to enter.
BioStack™ Microplate Stacker
& Error Codes
Plate Stacked Height
Measure height of top plate only
Number
7
8
9
setting tells the BioStack