Table of Contents
Advertisement
4. Remove the plate carrier shipping screw.
5. Remove the rubber band that holds the rotational wrist secure.
Note: Do not let the gripper flop around! Before moving the BioStack 3 or BioStack 4,
secure the gripper with a rubber band or tape to prevent it from losing its alignment. A
complex recalibration is required if it is knocked out of position.
Installing the gripper arm cover
6. Locate and install the gripper arm cover using the small Phillips-head
screwdriver.
Remove the Shipping Hardware—BioStack 3 | 21
Gripper arm cover and screws
Save the shipping hardware
BioTek Instruments, Inc.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the BioStack 4 and is the answer not in the manual?
Questions and answers