Remove The Shipping Hardware—Biostack 4 - Biotek BioStack 4 Operator's Manual

Remove the Shipping Hardware—BioStack 4
Warning: Remove the shipping hardware before turning on the BioStack.
: You need a standard screwdriver and a small Phillips-head screwdriver.
Tools
One shipping bracket wraps around the front
1. Remove the two screws from the front of the instrument.
2. Remove the remaining 4 screws inside that hold the bracket onto the instrument.
Carefully remove the bracket.
3. Remove the shipping block and four mounting screws inside the BioStack.
4. Remove the small, black cover plate that is stored on the shipping bracket. (See
picture below.)
Remove the Shipping Hardware—BioStack 4 | 23
and attaches to the inside. A shipping block sits inside.
BioTek Instruments, Inc.